Table of Contents
Advertisement
Upgrade Firmware
The Upgrade Firmware Screen allows you to upgrade the firmware or backup the system
configuration.
You can backup your system configuration by pressing the Save System Configuration "Save"
button. This will save the system configuration for future use.
You also can upgrade the firmware by inputting the correct password, browsing to the firmware
upgrade file and then pressing the "Upgrade" button. Do not reset or restart the device while
updating the firmware as this may cause the system to crash.
Pressing the "Factory Settings" button will reset the configuration data to its default value.
Figure 8-6: Upgrade Firmware
Page 77
Advertisement
Table of Contents
Need help?
Do you have a question about the FBR-4000 and is the answer not in the manual?
Questions and answers