Host Ip - LevelOne FBR-4000 User Manual

Multi-wan vpn router

Hide thumbs Also See for FBR-4000:

Table of Contents

Host IP

This feature is used in the following situations:



You have Multi-Session PPPoE and wish to bind each session to a particular PC on your LAN.



You wish to use the Access Filter feature. This requires that each PC is identified by using the

Host IP screen.



You wish to have different Block URL settings for different PCs. This requires that each PC is

identified by using the Host IP screen. (You do not have to use the Host IP feature to apply the

same Block URL settings to all PCs.)



You wish to reserve a particular (LAN) IP address for a particular PC on your LAN. This allows the

PC to use DHCP (In Windows this setting is configured as: "Obtain an IP address automatically")

while gaining the benefits of a fixed IP address. The PC's IP address will never change, allowing it

to be provided to other users and applications.

Figure 4-1: Host IP

Page 28

Table of Contents

Do you have a question about the FBR-4000 and is the answer not in the manual?