Table of Contents
Advertisement
Default:
Figure 2.1 Default User System Interface Circuit
Mode Pins (MD2, MD1 and MD0), NMI, and WAIT: The NMI signal is input to the MCU
through the emulator control circuit. The rising/falling time of the NMI signal must be 8 ns/V or
less. The mode pins are only monitored. The CPU mode depends on the HDI Configuration
settings.
Figure 2.2 User System Interface Circuit for MD2, MD1, MD0, NMI, and WAIT
RESET:
Figure 2.3 User System Interface Circuit for RESET
6
Advertisement
Table of Contents
