Oil Filling Up - VOGE SR4 Max LX350T-5A Book

Oil filling up

·Confirm the oil element already replaced.
·Confirm the oil drainage bolt and seal ring are both replaced and re-assembled.
–Fill up with new oil of VOGE brand by 1800ml the first time, then check the oil view hole, the oil level
shall be between the scale lines MAX and MIN, then screw up the cap if filling-up port. Then make
engine run under different rotation speeds for 5 minutes, while checking the leakage when engine is
running.
–Finally check the oil level.
Oil specification：SAE 5W-40-SJ or above Dispose the replaced old oil and element
in environmental friendly way Volume of filling up：1.8L
Wrong oil specification or bad oil may damage the engine, EFI system and shorten the working
life of spark plug and catalyst in muffler.
!
Caution
!
Warning
57