Outdoor Fan / Fan Motor - Daikin ARKC12RV2S Service Manual

Outdoor Fan / Fan Motor

2. Outdoor Fan / Fan Motor
Warning
Step
1 Remove the nut, and
then the outdoor fan.
2 Disconnect the
connector [S70] or
[S71] depending on the
model.
3 Cut the clamp and
release the fan motor
lead wire from the
groove.
4
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Procedure
Nut
Outdoor fan
Fan motor lead wire
Groove
In case of [S71] models
Right View
D-cut
(R22385)
[S70]
Clamp
(R22386)
[S71]
(R23995)
Si001560EB
Points
Nut size: M6
10 mm
(0.39 inch)
(R18954)
When reassembling, align
the mark of the outdoor fan
with the D-cut section of the
motor shaft.
[S70]/[S71]: fan motor
The location of the
connectors [S70] and [S71]
is different.
When reassembling, put the
fan motor lead wire through
the back of the fan motor so
as not to be entangled with
the outdoor fan.
Outdoor fan
Lead wire
Removal Procedure
(R3249)