Document Purpose; Installation Checklist; Dd6400 System Features - Dell EMC PowerProtect DD6400 System Expansion Manuallines

Document purpose

This installation guide provides instructions for installing the hardware associated with PowerProtect systems. Systems are
shipped to the customer site as separate components to install in an existing rack at the site (field-installed).
This document is intended for customers or Dell EMC Support personnel who are qualified to install PowerProtect systems.
Field-installed systems
To install PowerProtect systems in an existing rack at the customer site, follow all the instructions in this document to rack,
cable, and configure the system.

Installation checklist

This section lists prerequisites and best practices for installing a PowerProtect DD6400 system.
Review the following table before installing the DD6400.
Requirement
Rack space
Rack power connections
Networking
Licenses

DD6400 system features

Table 1. DD6400 system features
Feature
Processor
Kernel
Memory Total
Configurations
DIMMs
HDD Drive Size
Supported Active Tier
Capacity
Cloud Tier
SSDs for DD OS in 2.5"
Stream Count
8 Introduction and Preparation
Description
● DD6400 controller only: 2U
● DD6400 controller with one ES40: 5U
● DD6400 controller with two ES40s: 8U
Minimum of two redundant PDUs
● System hostname
● Minimum of two IP addresses:
○ iDRAC (static IP address required)
○ ethMa
● List of DNS servers
Electronic license file for the proper DDOS version, storage
capacity, and feature selection.
Base
Expanded
Base
Expanded
Single Node
2 x Intel Xeon Silver, 2.2 Ghz, 10C/20T
4.4
192 GB
12 x 16 GB
8 TB
8 <-> 32 TBu
36 <-> 172 TBu
64 TBu
344 TBu
2, 0.96 TB, 1 WPD
270 Wr, 75 Rd