Procedure For Setting The On And Off Timers For The Remaining Days Of The Week; Copying On And Off Timer Settings; Setting Different On And Off Times For The Remaining Days - Kodak X-Omat 3000 Operator's Manual

Procedure for Setting the On and Off Timers for the Remaining Days of the Week

If the hours that you would like to operate the Processor on the other days of the week are the same hours as those
you set for Monday, follow Steps 1 through 3 below.
If you do not want to repeat Monday's on and off times for the other days of the week, follow Steps 4 through 13 on
Page 55.

Copying On and Off Timer Settings

[1] Press the "NEXT DAY" key to advance the display to show Tuesday.
PRESS BUTTON TO SET UP FOR MONDAY
CONTROL
[2] Press the "COPY PREV" key. You will hear a beep when you press the "COPY PREV" key. If you would
like to ensure that Monday's on and off times were repeated for the next day, do the steps below.
PRESS BUTTON TO SET UP FOR TUESDAY
CONTROL
[3] Repeat the entire process to set the Automatic Timers for the remaining days of the week.

Setting Different On and Off Times for the Remaining Days

If you want to select different on and off times for Timer1 and Timer2 than those you set for Monday, do the steps
below.
[4] Press the "NEXT DAY" key to advance the display to show Tuesday.
PRESS BUTTON TO SET UP FOR MONDAY
CONTROL
[5] Press the "TIMER1 CONTROL" key.
PRESS BUTTON TO SET UP FOR TUESDAY
CONTROL
[6] Press the "ON" key to enable Timer1.
SET UP TIMER1 FOR MONDAY
[7] Press the "ON TIME" key.
5B6328 – 30SEP98
TIMER1 TIMER2
CONTROL
TIMER1
TIMER1
TIMER1
COPY NEXT
PREV DAY
COPY NEXT
PREV DAY
COPY NEXT
PREV DAY
COPY NEXT
PREV DAY
ON OFF
Advanced Setup Options
DONE/
RETURN
DONE/
RETURN
DONE/
RETURN
DONE/
RETURN
DONE/
RETURN
55