Procedure For Turning On Or Off The Cool Down Option - Kodak X-Omat 3000 Operator's Manual

OPERATORS MANUAL

Procedure for Turning On or Off the Cool Down Option:

[1] From the Walk-Up Menu, press the "GO TO SETUP" key.
READY
[2] Enter the 4-digit access code.
[3] Press the "MORE" key.
[4] Press the "OPTIONS" key.
[5] Press the "MORE" key.
[6] Press the "MORE" key.
[7] Press the "COOL DOWN" key.
STANDBY
[8] Press either key:
• the "ON" key to enable the Cool Down option
• the "OFF" key to disable the Cool Down option
COOL DOWN IS ON
[9] Press the "DONE/RETURN" key repeatedly until you return to the display shown below. Then press the
"YES" key to return to the Walk-Up Menu.
EXIT SETUP?
64
DRYER SLEEP
TEMP
1 2
INFO SETUP
REPLEN DAILY
MODE STARTUP
ACCESS USER
CODE ACCESS
ROLLER
MODE JOG
ON OFF
YES
SELECT MORE
CYCLE
3 4
CYCLE MORE
OPTIONS
DISPLAY MORE
UNITS
TEMP MORE
LOCK
COOL MORE
DOWN
STD
GO TO
SETUP
CANCEL
REQUEST
DONE/
RETURN
DONE/
RETURN
DONE/
RETURN
DONE/
RETURN
DONE/
RETURN
DONE/
RETURN
CANCEL
REQUEST
30SEP98 – 5B6328