Preparing The Graphics Card; Removing The Stock Cooler; Asus Tuf Gaming Geforce Rtx 4090 - EK-Quantum Vector2 Strix/TUF RTX 4090 D-RGB ABP Set User Manual
Gpu water block
Hide thumbs
Also See for Vector2 Strix/TUF RTX 4090 D-RGB ABP Set:
- User manual (23 pages) ,
- Manual (21 pages) ,
- Quick start manual (16 pages)
Table of Contents
Advertisement
PREPARING THE GRAPHICS CARD
REMOVING THE STOCK COOLER
ASUS TUF GAMING GEFORCE RTX 4090
STEP 1
First, remove eight (8) screws from the backside of the Stock cooler
(using Phillips head screwdriver).
STEP 1
STEP 2
Unscrew three (3) screws from the I/O Bracket (using Phillips head
screwdriver). Unplug the connectors in order to remove the stock
cover from the GPU PCB.
STEP 2
- 8 -
Important! Before starting, make sure to have a clean, flat
surface to work on. It is recommended to put foam or soft
material to lay the graphics card on.
Advertisement
Table of Contents
Need help?
Do you have a question about the Vector2 Strix/TUF RTX 4090 D-RGB ABP Set and is the answer not in the manual?
Questions and answers