EK-Quantum Vector2 Strix/TUF RTX 4090 D-RGB ABP Set User Manual page 11

TERMINAL O-RING
14 x 1 mm
M2.5-M3x6.6 STANDOFF
PCB
CARDBOARD
M3.5-M2.5x11.3 STANDOFF
ACTIVE BACKPLATE
STEP 2
STEP 3
- 11 -
STEP 2
Carefully remove the complete active backplate with the terminal.
Additional two (2) O-rings 14 x 1 mm needs to be removed.
STEP 3
Unscrew five (5) M2.5-M3 x 6.6 standoffs with the provided
tool (EK-Plug out Spludger Tool). Make sure not to unscrew
the M3.5-M2.5 x 11.3 standoffs! In case the M3.5-M2.5 x 11.3
standoffs unscrew, carefully tighten it back with the 4 mm
wrench. After removing the standoffs, the PCB cardboard needs
to be removed. Save the removed parts for later use.
For this step, you will need:
EK-Plug Out Spludger Tool