Cutting And Placing Thermal Pads - EK-Quantum Vector2 Strix/TUF RTX 4090 D-RGB ABP Set User Manual

CUTTING AND PLACING THERMAL PADS

Thermal Pad F – 1.0 mm (120 x 16 mm)
120 mm
Thermal Pad F – 1.5 mm (120 x 16 mm)
120 mm
Thermal Pad G – 2.0 mm (120 x 24 mm)
120 mm
Thermal Pad - 120 x 16 x 1.0 mm
F1
STEP 1
The GPU water block comes with thermal pads that have to be cut
into smaller pieces to cover all the VRM components, such as COILs,
MOSFETs, and drivers.
1 mm
1.5 mm
Replacement thermal pads:
Thermal Pad F 1.0 mm – (120 x 16 x 1 mm) EAN: 3830046996732
Thermal Pad F 1.5 mm – (120 x 16 x 1.5 mm) EAN: 3830046996749
Thermal Pad G 2.0 mm – (120 x 16 x 2 mm) EAN: 3830046996794
2 mm
STEP 1
STEP 2
Once cut to the size, Thermal Pads should be placed on the PCB, as
shown in the picture:
STEP 2
- 12 -
Remove the protective foil from both sides of the thermal
pad before installation.