Option 2: Asus Geforce Rtx 4090 Tuf Gaming - EK-Quantum Vector2 Strix/TUF RTX 4090 D-RGB ABP Set User Manual

Gpu water block

Hide thumbs Also See for Vector2 Strix/TUF RTX 4090 D-RGB ABP Set:

Table of Contents

Screws must be present in the places marked on the picture.

STEP 3

OPTION 2: ASUS GEFORCE RTX 4090 TUF GAMING

M2.5 x 4 AX1 SCREW

M2.5 PVC WASHER

Use nine (9) M2.5 x 4 AX1 screws and PVC washers to tighten the

GPU PCB. An additional one (1) M2.5 x 6 AX1 Screw must be secured

with an M2.5 Nut. Tighten the screws evenly using the Phillips-head

screwdriver. EK recommends you start tightening the screws around

the GPU core first and then continuing outward to prevent damaging

the GPU. Always use a plastic washer under each screw.

After attaching the water block, three (3) saved Factory provided

I/O Bracket screws can be reused.

M2.5 x 6 AX1 SCREW

M2.5 NUT

I/O BRACKET SCREW

STEP 3

- 15 -

Table of Contents

Do you have a question about the Vector2 Strix/TUF RTX 4090 D-RGB ABP Set and is the answer not in the manual?