Cutting And Placing Thermal Pads - Water Block - EK-Quantum Vector2 EVO Strix-TUF RTX 4080 ABP Set User Manual

M3 x 6 DIN7991 SCREW
REPLACEMENT I/O BRACKET

CUTTING AND PLACING THERMAL PADS - WATER BLOCK

Thermal Pad- Inductor – (120x12x1 mm)
120 mm
Thermal Pad - VRM – (120x6x2 mm)
120 mm
Thermal Pad- VRAM – (55x16x2 mm)
55 mm
2 mm
STEP 2
1 mm
2 mm
STEP 1
- 11 -
STEP 4
Position the replacement I/O Bracket on the water block. During
this process, make sure you have aligned the holes. Secure it with
the two (2) M3 x 6 DIN7991 Screws and Allen Key 2 mm.
For this step, you will need:
Replacement I/O
Allen Key 2 mm
STEP 1
The GPU water block comes with pre-cut thermal pads, but some of
them need to be additionally cut into smaller pieces.
Remove the protective foil from both sides of the thermal
pad before installation.
Replacement thermal pads:
Thermal Pad- Inductor – (120x12x1 mm) EAN: 3831109914526 – 2 pcs
Thermal Pad- VRM – (120x6x2 mm) EAN: 3831109914533 – 2 pcs
Thermal Pad- VRAM – (55x16x2 mm) EAN: 3831109914540 – 3 pcs
M3 x 6 DIN7991
Bracket Screw (2 pcs)