York Fitness Ti-Co Owner's Manual page 8

STEP 04
1. PLACE 50MM SQUARE CAP (41) INTO BOTH ENDS OF LEG EXTENSION
/ARM CURL BAR (14).
2. ATTACH SEAT ASSEMBLY (13) TO VERTICLE BEAM (10), WITH BOLTS
(50), NUTS (63), AND WASHERS (68) AS SHOWN.
3. ATTACH LEG EXTENSION /ARM CURL BAR (14) TO SEAT ASSEMBLY (13).
4. ATTACH BACK SEAT (20) TO VERTICLE BEAM (10) AS SHOWN.
5. ATTACH SEAT (19) TO SEAT ASSEMBLY (13) AS SHOWN.
6. SLIDE PAD HOLDERS (32) INTO THE HOLE PROVIDED.
7. SLIDE LEG EXTENSION/CURL PADS (29) ONTO PAD HOLDERS (32).
8. PLACE 1" ROUND CAP (40) INTO PAD HOLDERS (32).
-7-