Advertisement
STEP 05
1. PLACE 50MM SQUARE CAP (41) INTO BOTH ENDS OF PRESS BAR (15).
2. INSTALL OIL BUSHING (71) INTO THE PRESS BAR (15) AS SHOWN.
STEP 06
1. ATTACH PRESS BAR (15) TO TOP CROSS BEAM (12) WITH PRESS BAR
SHAFT (46) AND OIL BUSHING (71) WASHER (65) BOLT (61) AS SHOWN.
2. ATTACH PEC DEC PADS (28) AND HAND GRIP (36) SLIDE ONTO PEC DEC
ARM (16&17).
3. ATTACH HANDLE PIPE (43) AND HAND GRIP (36) TO PEC DEC ARM
(16&17) WITH BOLT (54), WASHER (68) AS SHOWN.
INSTALL PEC DEC ARM (16&17) TO PRESS BAR (15) WITH WASHER (65)
4.
AND NYLON NUTS (61) AS SHOWN.
-8-
Advertisement
