Table of Contents
Advertisement
7.0
LABELS and MARKINGS
7.1
LABELS: Figure 13 illustrates labels present on the product. Labels must be replaced if they are not present or are not
fully legible. Information provided on each label is as follows:
;
Label images are intended to be representative. Please refer to your product labels for specific information.
A
1) Maximum Free Fall 2) Average Arrest Force 3) Maximum Deployment Distance
B
1) Read all instructions.
1) Inspection Log 2) Read all instructions. 3) Applicable Standards
C
4) Manufactured (Year, Month) 5) Model Number 6) Length (ft.) 7) Lot Number 8) Materials
1) Only compatible connections may be made with web loops.
D
2) Illustration of web loop connection
E
1) Attach unused lanyard legs to the lanyard keepers on your harness.
1) Always attach energy absorber portion of lanyard to harness dorsal D-ring.
F
2) Illustration of proper connections
1) Read all instructions.
G
2) Illustration of inappropriate connections
8.0
RFID Tag
8.1
LOCATION: 3M product covered in these user instructions is equipped with a Radio Frequency Identification (RFID) Tag.
RFID Tags may be used in coordination with an RFID Tag Scanner for recording product inspection results. See Figure 12
for where your RFID Tag is located.
8.2
DISPOSAL: Prior to disposing of this product, remove the RFID Tag and dispose/recycle in accordance with local
regulations. For more information, please visit our website: http://www.3M.com/FallProtection/RFID
9.0
GLOSSARY OF TERMS
9.1
DEFINITIONS: The following terms and definitions are used in these instructions.
;
For a comprehensive list of terms and definitions, please visit our website: www.3m.com/FallProtection/ifu-glossary
• AUTHORIZED PERSON: A person assigned by the employer to perform duties at a location where the person will be exposed to a fall
hazard.
• COMPETENT PERSON: One who is capable of identifying existing and predictable hazards in the surroundings or working conditions
which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective measures to
eliminate them.
• FALL ARREST SYSTEM: A collection of Fall Protection equipment configured to protect the user in the event of a fall.
• QUALIFIED PERSON: A person with a recognized degree, certificate, or professional standing, or who by extensive knowledge,
training, and experience has successfully demonstrated their ability to solve or resolve problems relating to Fall Protection and Rescue
systems to the extent required by applicable national, regional, and local regulations.
• RESCUER: A person using the Rescue system to perform an assisted rescue.
• RESTRAINT SYSTEM: A collection of Fall Protection equipment configured to prevent the user from reaching a fall hazard. No free fall is
permitted.
• USER: A person who performs activities while protected by a Fall Protection system.
• WORK POSITIONING SYSTEM: A collection of Fall Protection equipment configured to support a user at a work position.
15
Advertisement
Table of Contents
