Table of Contents
Advertisement
SAFETY INFORMATION
EN
Please read, understand, and follow all safety information contained in these instructions, prior to the use of this product. FAILURE
TO DO SO COULD RESULT IN SERIOUS INJURY OR DEATH.
These instructions must be provided to the user of the equipment. Retain these instructions for future reference.
Intended Use:
This product is used as part of a complete Fall Protection system.
Use in any other application including, but not limited to, material handling, recreational or sports related activities, or other activities not
described in these instructions, is not approved by 3M and could result in serious injury or death.
This product is only to be used by trained users in workplace applications.
!
WARNING
This product is used as part of a complete Fall Protection system. All users must be fully trained in the safe installation and operation of their
complete Fall Protection system. Misuse of this product could result in serious injury or death. For proper selection, operation, installation,
maintenance, and service, refer to all instruction manuals and manufacturer recommendations. For more information, see your supervisor or
contact 3M Technical Services.
•
To reduce the risks associated with using an Energy-Absorbing Lanyard which, if not avoided, could result in serious injury or
death:
-
Inspect the product before each use and after any fall event, in accordance with the procedures specified in these instructions.
-
If inspection reveals an unsafe or defective condition, remove the product from service immediately and clearly tag it "DO NOT USE".
Destroy or repair the product as required by these instructions.
-
Any product that has been subject to fall arrest or impact force must be immediately removed from service. Destroy or repair the product
as required by these instructions.
-
Ensure that Fall Protection systems assembled from components made by different manufacturers are compatible and meet all applicable
Fall Protection regulations, standards, or requirements. Always consult a Competent or Qualified Person before using these systems.
-
Ensure the product is kept free from all hazards including, but not limited to: entanglement with users, other workers, moving machinery,
other surrounding objects, or impact from overhead objects that could fall onto the product or users.
-
Use appropriate edge protection when the product may contact sharp edges or abrasive surfaces.
-
Do not twist, tie, or knot the product.
-
Avoid trip hazards with lanyard legs. Attach any unused lanyard legs to the lanyard parking elements on your full body harness, if present.
-
Do not exceed the number of allowable users as described in these instructions.
-
Ensure the product is configured and installed properly for safe operation as described in these instructions.
-
Use caution when installing, using, or moving the product as moving parts may create pinch points.
•
To reduce the risks associated with working at height which, if not avoided, could result in serious injury or death:
-
Your health and physical condition must allow you to safely work at height and to withstand all forces associated with a fall arrest event.
Consult your doctor if you have questions regarding your ability to use this equipment.
-
Never exceed allowable capacity of your Fall Protection equipment.
-
Never exceed the maximum free fall distance specified for your Fall Protection equipment.
-
Do not use any Fall Protection equipment that fails inspection, or if you have concerns about the use or suitability of the equipment.
Contact 3M Technical Services with any questions.
-
Some subsystem and component combinations may interfere with the operation of this equipment. Only use compatible connections.
Contact 3M Technical Services prior to using this equipment in combination with components or subsystems other than those described in
these instructions.
-
Use extra precautions when working around moving machinery, electrical hazards, extreme temperatures, chemical hazards, explosive or
toxic gases, sharp edges, abrasive surfaces, or below overhead materials that could fall onto you or your Fall Protection equipment.
-
Ensure use of your product is rated for the hazards present in your work environment.
-
Ensure there is sufficient fall clearance when working at height.
-
Never modify or alter your Fall Protection equipment. Only 3M, or persons authorized in writing by 3M, may make repairs to 3M
equipment.
-
Before using Fall Protection equipment, ensure a written rescue plan is in place to provide prompt rescue if a fall incident occurs.
-
If a fall incident occurs, immediately seek medical attention for the fallen worker.
-
Only use a full body harness for Fall Arrest applications. Do not use a body belt.
-
Minimize swing falls by working as directly below the anchorage point as possible.
-
A secondary Fall Protection system must be used when training with this product. Trainees must not be exposed to an unintended fall
hazard.
-
Always wear appropriate Personal Protective Equipment when installing, using, or inspecting the product.
-
Never work below a suspended load or worker.
-
Always maintain 100% tie-off.
FORM NO: 5908270 REV: C
2
Advertisement
Table of Contents
