Table of Contents
Advertisement
Quick Links
AS/NZS 1891.1:2007
Industrial fall-arrest systems
and devices Harnesses and
2
1
1390061
Form No: 9598613 Rev: C
Certified to
ancillary equipment
Lic: BMP 689960
3
2
1
4
1390062
PROTECTA FIRST
Certified by
USER INSTRUCTION MANUAL
BSI Certi ed Product
1
7
6
2
4
5
1390063 - 1390064
FULL BODy HARNESS
1
2
3
Attachment
Models
Elements
1390061
√
√
1390062
√
√
√
1390063
√
1390064
√
4
5
6
7
7
Features
√
√
√
√
√
√
© 3M 2019
Advertisement
Table of Contents
Related Manuals for 3M Protecta first
Summary of Contents for 3M Protecta first
- Page 1 PROTECTA FIRST Certified to Certified by FULL BODy HARNESS AS/NZS 1891.1:2007 Industrial fall-arrest systems and devices Harnesses and USER INSTRUCTION MANUAL ancillary equipment Lic: BMP 689960 BSI Certi ed Product Attachment Models Elements Features 1390061 1390062 1390063 - 1390064 1390061 √...
- Page 6 Only competent users should use this equipment Manufacturers instructions Item: Fall Arrest Harness must be followed Part number: XXXXXXX Fall not to exceed 2m BSI Certi ed Product Serial Number: XXXXXX Quality AS/NZS 1891.1 ISO 9001 Date of manufacture: (yy/mm/dd): YY/MM/DD Lic: BMP 689960 Date to be removed: (yy/mm/dd): YY/MM/DD 1.
- Page 7 50kg 100kg 160kg Fall Distance (m)
-
Page 8: Safety Information
Avoid surfaces and objects that can damage the user or equipment. Ensure there is adequate fall clearance when working at height. Never modify or alter your fall protection equipment. Only 3M or parties authorized in writing by 3M may make repairs to the equipment. -
Page 9: Specifications
Before using this equipment, record the product identification information from the ID label in the “Inspection and Maintenance Log” at the back of this manual. DESCRIPTION Figure 1 defines available Full Body Harness models. Harness Models are available with various combinations of the following features: Figure 1 Reference: Description: Sizes... - Page 10 3M recommends a seat board, suspension work seat, seat sling, or a boatswain chair. Contact 3M Fall Protection for more information on these items.
-
Page 11: System Use
Ensure all connectors are fully closed and locked. 3M connectors (snap hooks and carabiners) are designed to be used only as specified in each product’s user’s instructions. See Figure 6 for inappropriate connections. 3M snap hooks and carabiners should not be connected: To a D-Ring to which another connector is attached. -
Page 12: Harness Use
DONNING AND FITTING THE PROTECTA FIRST FULL BODy HARNESS: Figure 10 illustrates donning and fitting of the Protecta First Full Body Harness. Prior to each use, inspect the harness per the checklist on the “Inspection and Maintenance Log (Table 1)”. To don and fit the harness: Procedures for buckling and adjusting the straps on you Protecta First Harness will vary with the harness model. - Page 13 The harness and pads may be air dried or tumble dried on low heat not exceeding 90° C (200° F). More information on cleaning is available from 3M. If you have questions concerning the condition of your harness, or have any doubt about putting it into service, contact 3M.
- Page 14 Table 1 – Inspection and Maintenance Log Serial Number(s): Date Purchased: Model Number: Date of First Use: Inspection Date: Inspected By: Inspection: (See Section 2.2 for Inspection Frequency) Component: User Competent Person Harness Hardware Inspect harness hardware including buckles (1), adjusters (2), D-rings (3), etc. These items must not be (Diagram 1) damaged, broken, or distorted, and must be free of sharp edges, burrs, cracks, worn parts, or corrosion.
- Page 15 THIS PAGE HAS BEEN INTENTIONALLY LEFT BLANK...
-
Page 16: Fall Protection
3M’s option, to the repair or replacement of the goods or the refund of the purchase price of the goods. 3M will not be liable for any Equipment damage resulting from wear, abuse, damage in transit, failure to maintain the product or other damage beyond the control of 3M.