Table of Contents
Advertisement
5.4
PRODUCT LIFE: The functional life of the product is determined by work conditions and maintenance. As long as the
product passes inspection criteria, it may remain in service.
6.0
MAINTENANCE, SERVICE, AND STORAGE
;
Equipment that is in need of maintenance or scheduled for maintenance should be tagged "DO NOT USE". These
equipment tags should not be removed until maintenance is performed.
6.1
CLEANING: 3M product must be cleaned in accordance with 3M instructions. To clean the product, wash in a mild,
bleach-free detergent and rinse with clean water. The product should afterwards be hung to air-dry. Water used for
cleaning and temperatures used to air-dry must never exceed 130°F (54.4°C). For more information, please refer to the
technical bulletin on our website: http://www.3M.com/FallProtection/WebCleaning
;
For any questions about cleaning procedures, please contact 3M Technical Services.
6.2
SERVICE: This product is not repairable. Do not attempt to repair this product.
6.3
DISPOSAL: Dispose of the lanyard if it cannot be returned to service. Before disposing of the lanyard, cut the lanyard in
half or otherwise disable the lanyard to prevent accidental reuse.
6.4
STORAGE AND TRANSPORT: Store and transport the product in a cool, dry, clean environment out of direct sunlight.
Avoid areas where chemical vapors may exist. Thoroughly inspect components after extended storage.
;
It is recommended that the user limit exposure of the product to UV light. Prolonged exposure to UV light could
cause webbing material to degrade at a faster rate.
14
Advertisement
Table of Contents
