Figure 60 Certificate Request - Honeywell 30 Series Manual

HTTPS
Go to Setup  Network Setup  HTTPS  HTTPS.
This section explains how to enable authentication and encrypted communication. It
helps protect streaming data transmission over the Internet on higher security level.
Figure 59 HTTPS
HTTP & HTTPS: Check to enable the web browser to be accessed via HTTP or HTTPS.
HTTPS only: Check to enable the web browser to be accessed via only HTTPS with
higher security level. This option is selected by default.
Certificate Request
Go to Setup  Network Setup  HTTPS  CERTIFICATE REQUEST.
You can fill in certificate information and the certificate request file can be exported to
the certificate issuing authority for signing and then being imported to camera.

Figure 60 Certificate Request

Enter the information of Country, State or province, Locality, Organization and
Organization unit. Click CREATE.
Click EXPORT to export the certificate request to your local computer. After you get the
signing certificate from the certificate issuing authority, click CHOOSE FILE and
UPLOAD to import it to the camera. The imported certificate will replace the original
self-signed certificate of the camera.
After the certificate file is uploaded successfully, if you want to remove the certificate,
click REMOVE.
Upload files
Go to Setup  Network Setup  HTTPS  UPLOAD FILES.
Honeywell 30 Series IP Cameras User Guide
51