Remove The Front Bezel - HP ProLiant DL20 Gen10 Plus Maintenance And Service Manual

Remove the front bezel

Remove the front bezel
If you are using the virtual power button in iLO to power the server on/off, you do not need to remove the front bezel. Remove the front
bezel only if you need to access the front panel components.
Procedure Procedure
1. If installed, remove the Kensington security lock.
For more information, see the lock documentation.
2. Press the bezel release latch (callout 1), and then pivot the bezel open (callout 2).
3. Release the right side of the bezel from the front panel.
Remove the front bezel 55