Supermicro ASG-1014S-ACR12N4H User Manual page 58

A+ Server ASG -1014S-ACR12N4H User's Manual
HDD LED/UID Switch
The HDD LED/UID Switch connection is located on pins 13 and 14 of JF1. Attach a cable to
Pin 14 to show hard drive activity status. Attach a cable to Pin 13 to use UID switch. Refer
to the table below for pin definitions.
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Attach a cable to Pin 15 and
Pin 16 to show system power status. Refer to the table below for pin definitions.
NMI Switch
The non-maskable interrupt switch header is located on pins 19 and 20 of JF1. Attach it to a
hardware NMI switch on the computer case to trigger the NMI. Refer to the table below for
pin definitions.
HDD LED
Pin Definitions (JF1)
Pin# Definition
13 HDD LED+/UID Switch+
14 HDD LED-
Power LED
Pin Definitions (JF1)
Pin# Definition
15 Power LED+
16 Power LED-
NMI Switch
Pin Definitions (JF1)
Pin# Definition
19 NMI Switch
20 Ground
58