Supermicro ASG-1014S-ACR12N4H User Manual page 129

A+ server
Table of Contents

Advertisement

Appendix C: System Specifications
Appendix C
System Specifications
Processors
Single AMD EPYC™ 7002/7003 Series Processor
Note: Please refer to the motherboard specifications pages on our website for updates to supported processors.
Chipset
System on Chip
BIOS
256 Mb SPI AMI BIOS
SM Flash UEFI BIOS
®
Memory
Up to 4TB of ECC DDR4 3200 MHz speed, RDIMM/LRDIMM/3DS memory in sixteen DIMM slots.
Note: See the memory section in Chapter 3 for details and our website for updates to supported memory.
SATA Controller
On-chip (System on Chip) controller
Drive Bays
Twelve 3.5" internal SAS/SATA HDD drive bays and four internal 2.5" 7mm NVMe drive bays
PCI Expansion Slots
Two PCIe 4.0 x16 full-profile, half-length (left riser slot)
One PCIe 4.0 x16 low-profile, half-length (right riser slot)
M.2 Interface: 2 PCI-E 4.0 x2
M.2 Form Factor: 2280, 22110
M.2 Key: M-key
Motherboard
H12SSW-NTR; ATX form factor, 13.4" x 12.29" (34cm x 31.2cm)
Chassis
CSE-802TS-R804WBP; 1U Rackmount, W x H x D: 17.6" (447mm) x 1.7" (43mm) x 37" (940mm)
System Cooling
Six 4-cm counter-rotating PWM fans
Power Supply
Model: PWS-804P-1R (two power modules for redundancy)
AC Input Voltages: 100-240 VAC
Rated Input Current: 10-5.5A
Rated Input Frequency: 50-60 Hz
Rated Output Power: 800W
Rated Output Voltages: 66.66A (+12V)
Operating Environment
Operating Temperature: 10º to 40º C (50º to 104º F)
Non-operating Temperature: -40º to 60º C (-40º to 140º F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
129

Advertisement

Table of Contents
loading

Table of Contents