Huawei UPS5000-A-30 kVA Quick Manual page 59

UPS5000-A-(30 kVA–120 kVA)
Quick Guide
The length and specifications of power cables on each UPS should be the same to
achieve current equalization in bypass mode. The power cables include bypass
input power cables and UPS output power cables.
Figure 1-67 Conceptual diagram of a 1+1 parallel system
Issue 14 (2022-09-06)
NO TICE
NO TE
● To clearly and simply show cable connections, this document uses oblique lines to
indicate the number of power cables of the same type.
● Do not configure circuit breakers for the mains and bypass input N wires and output N
wire.
● Connect power cables according to the silk screen on the terminals.
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Installation
52