Huawei UPS5000-A-30 kVA Quick Manual page 27

UPS5000-A-(30 kVA–120 kVA)
Quick Guide
1.
2.
3.
Figure 1-13 Pushing the rear handle into the groove
Step 5 Install the front panel.
1.
2.
Figure 1-14 Installing the front panel
Step 6 To prevent misoperations, you are advised to install a lock (diameter of the
effective lock cylinder: 5–6.3 mm) for the maintenance bypass switch.
Issue 14 (2022-09-06)
Press the switch on the rear handle.
Push the handle into the groove.
Tighten the screws on the rear handle clockwise.
Insert the lower end of the panel into the UPS.
Gently close the upper end of the panel.
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Installation
20