Replacing The Fuse - vacuubrand MZ 2C NT+2AK Instructions For Use Manual

Replacing the fuse

➨ Danger due to electrical voltage.
➨ Switch off the pump.
➨ Disconnect the electrical power cord before open-
+ The replacing of the fuse has to be carried out by a
+ After replacing the fuse, the pump must be checked for
1
page 68 of 80
ing the terminal box. After disconnecting from power,
wait five seconds to allow the capacitors to discharge.
trained electrician.
electric safety (see below)! Identify and eliminate the
cause of failure before switching on the pump again.
T20
4x