Table of Contents
Advertisement
2.1.3
Installing the CPU and Heat sink
Follow the steps below on installing CPU and CPU heat sink. The
GC68(A)-B7126 supports dual Intel Whitley platform for Ice-lake series CPU.
The following installation is based on an Intel LGA4189 socket.
1. Take out the CPU carrier and processor.
2. Align the triangle guide pin with the gold arrow guide pin. Then place the CPU
carrier on top of the processor and slightly push down to snap the latches.
3. Carefully flip over to check if the processor is secured.
41
http://www.tyan.com
Advertisement
Table of Contents
