Location Of The "Select" And "+" Keys; Configuration - Bodet Style 5 Quick Start Manual

6) LOCATION OF THE "SELECT" AND "+" KEYS

- These two keys are located on the back of the clock, on the right on Style 5, Style 5 s and
Style 5 date clocks, on the left on Style 7, Style 7 ellipse and Style 7 date clocks.
- The "Select" key is above the "+" key.

7) CONFIGURATION

a -
To access this menu, first press the "SELECT" key, then keeping the "SELECT" key
pressed down, press the "+" key for 3 seconds.
Caution : the seconds automatically reset to zero upon accessing the "configuration"
menu.
- The clock displays the previously selected operating mode :
Operating Mode
Independent
Minute slave movement
Half-minute slave movement
Calibration
Select the required operating mode using the "+" key.
Remark : make sure that the mode selected matches both the desired mode of operation
(e.g. minute slave movement), and the clock's descriptive label (e.g. "Ind.-Impuls.").
When the chosen operating mode (e.g. "Ind") appears on the display, press the "Select" key
to enter your selection. Avoid entering the Calibration mode, reserved for the manufacturer.
Note : It is possible to exit this menu at any time. All you have to do is to press the "Select"
key, and then with the "Select" key pressed down, press the "+" key. Release the two keys
afterwards.
b -
Style 5, Style 5 s, Style 7 and Style 7 ellipse clocks
Using the "+" key, select the type of display required from one of the following three
options :
Style 5, 5 s, 7 and 7 ellipse
Display
Style 5 date and 7 date
7