Civco ASTRA TEE Quick Start Instructions

At rest, the display reads:
Press ENTER.
Step 1:
Display will read:
Scan barcode on probe electrical connector
and place into the wall-mounted Connector
Step 2:
Holder.
Display will read:
Open door and insert pre-cleaned probe into
disinfection chamber, placing probe handle
into Probe Handle Holder. Loop probe cable
Step 3:
over cable strain relief.
Display will read:
Entering Exam ID is optional, but you must
scan ID or press ENTER to continue.
Step 4:
Display will read:
Install second probe (if required) following
same instructions or close door. Barcode
Step 5: scanner will remain illuminated until door is
closed or a second probe is scanned.
Display will read:
ASTRA TEE (50229_F)
ASTRA TEE
QUICK START INSTRUCTIONS
Ready for Use
Press Enter to Start
Scan Second Probe
Scan Operator ID
ENTER = Skip
®
Scan Probe
Insert Probe
Scan Exam ID
ENTER = skip
Close Door or