Sound Connector; J 5 / J 6 : C D - R O M A U D I O C O N N E C T O; G A M E / M I D I P O R; M I C : M I C R O P H O N E J A C - SOLTEK SL-65GS User Manual

Sound Connector:

J5/J6: CD-ROM Audio Connector
Connect J5/J6 to the CD-ROM Audio Connector.
Game/MIDI port
Connect the joystick or MIDI to this connector.
Mic:Microphone Jack
Line in: Audio in Jack
Speaker Out/Line Out: Audio Out Jack
Use JP3/JP4 to control speaker out or line out.
IDE LED Activity Light: (J8 pin1-4)
This connector connects to the hard disk activity indicator
light on the case.

Infrared Port Module Connector (J8 pin6-10)

The system board provides a 5-pin infrared connector-R1
for an optional wireless transmitting and receiving module.
Pin 6 through 10 are Transmit, GND, Receive (low speed),
Receive (high speed), and Vcc, respectively.
J8 pin12, 13: PWR Switch
Power Switch: Toggle this pin for turning on/off of the
Power supply (for ATX power only).
SLEEP Switch (J8 pin14, 15)
Toggle this jumper forces the system to sleep and the system
won't wake up until the hardware event is coming. (The
BIOS Power Management setting must be Enabled.)
13