Chipset Features Setup
Chipset Features Setup changes the values of the chipset
registers. These registers control the system options.
Run the Chipset Features Setup as follows:
1. Choose "CHIPSET FEATURES SETUP" from the Main
Menu and a screen with a list of options will appear.
Auto Configuration
RAS Pulse Width Refresh
RAS Precharge Time
RAS TO CAS Delay
ISA BUS Clock Frequency
Starting Point of Paging
SDRAM CAS Latency
SDRAM WR Retire Rate
CPU TO PCI Burst Mem. WR
System BIOS Cacheable
Video RAM Cacheable
Memory Hole at 15M-16M
AGP Aperture Size
Concurrent function(MEM)
Concurrent function(PCI)
CPU Pipeline Control
PCI Delay Transaction
CPU Host/SDRAM Clock
2. Use one of the arrow keys to move between options and
modify the selected options by using PgUp/PgDn/+/ ¡ Ð
keys.
A short description of screen options follows:
Auto
Configuration
RAS Pulse Width
Refresh
24
ROM PCI/ISA BIOS
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
: Enabled
: 5T
: 3T
: 3T
: PCICLK/4
: 1T
: 3T
: x-1-1-1
: Enabled
: Enabled
: Enabled
: Disabled
: 64MB
: Enabled
: Enabled
: Enabled
: Enabled
: Default
Choose Enabled (default) or
Disabled. The system sets all
options on the left side of the screen
automatically when you choose
Enabled.
The system designer must select the
number of CPU clock cycles allotted for
the RAS pulse refresh, according to
DRAM specifications. The choice: 4T, 5T,
6T, 7T.
CPU Clock Ratio Jumpless: Enabled
Processor Core Frequency: X4.5
↑ ↓ → ←: Select Item
ESC: Quit
F1 : Help
F5 : Old Values (Shift)F2 : Color
F7 : Load Setup Defaults
PU/PD/+/-: Modify