Boot Sequence
Swap Floppy Drive Choose Enabled or Disabled
Boot Up Floppy
Seek
Boot Up NumLock Choose On (default) or Off. This
Status
Memory Parity
check
Typematic Rate
Setting
Typematic Rate
(Chars/Sec)
Typematic Delay
(Msec)
22
Default is "A, C, SCSI" This option
determines which drive to look at
first for an operating system.
(default). This option swaps floppy
drive assignments when it is enabled.
Enabled (default): During POST,
BIOS checks the track number of the
floppy disk drive to see whether it
is 40 or 80 tracks.
Disabled: During POST, BIOS will
not check the track number of the
floppy disk drive.
option lets user activate the
NumLock function at boot-up.
Choose Enabled or Disabled(default).
Choose Enabled or Disabled
(default). Enable this option to
adjust the keystroke repeat rate.
Range between 6 (default) and 30
characters per second. This option
controls the speed of repeating
keystrokes.
Choose 250 (default), 500, 750, and
1000. This option sets the time
interval for displaying the first and
the second characters.