Program Message Examples; Example 1; Example 2 - HP 83751A Programming Manual

Program Message Examples

The following parts of the sweeper SCPI command set will be used to
demonstrate how to create complete SCPI program messages:

Example 1

Example 2

: FRF.Quency
: POWER
The command is correct and will not cause errors. It is equivalent to
sending:
This command results in a command error. The command makes use of
the default [:CWJ node. When using a default node, there is no change to
the current path position. Since there is no command WULT" at the root,
an error results. A correct way to send this is:
or as in example 1.
Getting Started Programming
Essentials for Beginners