Clear - HP 83751A Programming Manual

MODE/
MODIFIERS
FM Input Sensitivity
AC Coupled FM
Direct Coupled FM
The sweeper responds to both Device Clear (DCL) and Selective De-
vice Clear (SDC) and initializing the interface so that it is ready to re-
ceive HP-IB programming codes.
Remote/Local Changes
The sweeper goes to the Remote state when the LREN line is true
(low) and the sweeper receives its listen address. In Remote, all front
panel functions are disabled except the LINE switch and the LOCAL
key, The LOCAL function can also be disabled via the Local Lockout
The sweeper goes to the Local state when it receives the Go To Local
(GTL) command or when the LREN line is set false (high). If the Lo-
cal Lockout (LLO) command has not been executed, the 83750 Series
can also be set to Local by pressing the LOCAL key. In Local, the front
panel is active but the instrument will still respond to HP-II3 pro-
gramming codes.
3-22
Table 1. Input Programming Codes (8 of 8)
FUNCTION
PLUG-IN SPECIAL FUNCTlONS
-20 MHz/V
-6 MHz/V
AC Coupled
Direct Coupled

Clear

PROGRAM CODE
NUMERIC
ACTIVATE FORMAT
NUMERIC VALUE
SCALE RANGE