HP 83751A Programming Manual page 143

INITiate:CONTinuous
Query Syntax
Sets and queries the state of the CONTINUOUS initiation switch. This is more
commonly known as SINGLE or CONTINUOUS sweep, but this is how all
triggered SCPI instruments will be initiated. This does not affect a sweep in
progress.
*RST setting is OFF
INITiate[:IMMediate]
Causes the initiation of a sweep. Useful mainly in the INIT:CONT OFF mode
of operation (single sweep). By combining the *OPC, *WA1 facilities with the
and the "SINGLE SWEEP" command can be achieved.
INITiate:CONTinuous?
The sweep wilI be re-started at the end of sweep automatically.
The sweep wi.U wait until an INIT[:IMMediate] is sent to
re-initiate a sweep.
Programming Commands
Triggering in the Sweeper
2-37