SYSTem:LANGuage "SCPI"
SYSTem:LANGuage?
This command causes the instrument to perform a language switch to another
language system. TMSL is an alias for SCPI. For HP 8360 Series compatibility,
the unquoted forms are also accepted, however, queries are always quoted.
SYSTem:PRESet[:EXECute]
This command sets the instrument state to either a factory or user defined
state depending on the setting of SYSTem:PRESet:TYPE. This is the same as
pressing the front panel green cm) key. There is no corresponding query.
SYSTem:PRESet:SAVE
This command saves the present state for use whenever the command
pressed.
I
Programming Commands
System Subsystem
2-83