Frequency[:Cw[:Fixed] - HP 83751A Programming Manual

Programming Commands
Marker Subsystem
MARKer[n]:FREQuency
MARKer[n]:FREQuency Cnum>[freq suffix]lMAXimumiMINimum
MARKer[n]:FREQuency? [MAXimumIMINimum]
Sets and queries the specified marker frequency (marker number one is the
default if [n] is not spemed). The value is interpreted differently based on
the value of MARKer[n]:MODE.
MARKer[n] :MODE How the frequency of the marker is determined.
Absolute frequency is used. The limits are confuted
to the present START and STOP frequency limits.
For Front panel, if a value is set outside current
the closer frequency (either start or stop frequency
with respect to the new entered value.) For SPCI
command, the value is granted as user request.
Absolute frequency is used for setting the value of the
specified Marker. However, querying the specified
Marker value will result with respect to DELTA
Reference Marker. For example, if DELTA Reference
Marker is set to 1 GHz, the specified Marker is set
to 5 GHz. Querying the specified Marker value will
return 4 Ghz. The limits are also confined to the
present START and STOP frequency limits.
Reference Marker can be set using
MARKer[n]:REFerence <n> .
*RST values are the same as the FREQ:CENT *RST value.
2-40