HP 83751A Programming Manual page 229

SCPI Error Message - The SCPI error message is Data out of range in
q
the example.
Detailed Description - All information after the semicolon (;) is a
q
detailed description of what exactly caused the error. In the example,
Test Patch Value Out of Range tells you that the user has entered a
Self-Test Patch with upper or lower limit values greater than allowed. If
no detailed description exists, it will be omitted from the message.
Action Required - The text that appears below each error message listing
l
contains corrective actions that should be followed in order to correct
the error condition. Note that the action required is never shown in the
sweeper display.
Error Messages
4-7