4.3 bicycle frame with D-Shape fork
This type of frames features a 1"-1/8 upper bearing and a fork steerer with a non- circular section
(commonly called D-shape). In this configuration, you must use the 46 mm topcover (13).
In the case of mounting on a frame with a D-shape fork, there are two mounting options:
4.3.1 Assembly with S-DCR cover (8) and a traditional handlebar, in this configuration the cables will enter
under the stem in plastic cover passing through the spacers and 46 mm topcover (13).
4.3.2 Assembly without S-DCR cover (8) with a DCR handlebar, in this configuration the cables will enter
directly into the stem passing through the spacers and 46 mm topcover (13).
Stem Superbox DCR
Fig. 4.5
Cable routing view with S-DCR cover system
Fig. 4.6
Cable routing view with DCR system
21