Page 1
TRANSLATION OF ORIGINAL INSTRUCTIONS PNEUMATIC RIVETING TOOL FOR RIVETS Ø 2.4 ÷ Ø 4.8 (Ø 4.8 ALUMINIUM ONLY) www.air-allied.com.au sales@air-allied.com.au www.air-allied.com.au...
Page 2
The undersigned Far S.r.l., having its office in Quarto lnferiore (BO), Via Giovanni XXIII No. 2, herewith DECLARES on its sole responsibility that the riveting machine Type: RAC 83/95 - Pneumatic tool Application: for rivets diameter. 2.4—4.8 mm (4.8 aluminum only) which is the object of this declaration complies with the basic safety requirements established in the law decree Leg.
GENERAL NOTES AND USE The tool must be used for rivets diam. 2.4 - 4.8 mm only. Diameter is 4.8 mm only in aluminum. Code Ø D Ø A ÷ 717001 8.5 2.25 1.7 ÷ 2.1 717002 ...
TOOL IDENTIFICATION • Do not carry the connected tool by pulling the hose. The hole must be far from any heating sources or from cutting TECHNICAL DATA parts. MAINTENANCE & CHANGE OF SIZE •...
TOOL IDENTIFICATION WARNING! The riveting tool RAC 83 AX is identified from a marking Disconnect air feed when performing those that shows company name and address of manufacturer, designation of the tool, CE mark and year of manufactur- operations. ing. If any service is requested, please make reference to the data shown on the marking.