Bluetooth
VX3Plus without Label
If the VX3Plus Bluetooth address barcode label does not exist, follow these steps to create a
unique Bluetooth address barcode for the VX3Plus:
First, locate the VX3Plus Bluetooth address by tapping Start | Settings | Control Panel |
Bluetooth | About tab.
Next, create a Bluetooth address barcode label for the VX3Plus
The format for the barcode label is as follows:
Create and print the label.
Scan the VX3Plus Bluetooth address barcode label with the Bluetooth barcode reader.
The devices are paired. The Bluetooth barcode reader responds with a series of beeps and LED
flashes. Refer to the following section titled "Bluetooth Beep and LED Indications".
Note:
1
Free barcode creation software is available for download on the World Wide Web. Search
using the keywords "barcode create".
E-EQ-VX3PLUSRG-A
Figure 1-11 About tab and Bluetooth Address
•
Barcode type must be Code 128.
•
FNC3 character followed by string Uppercase L, lowercase n, lowercase k,
uppercase B and then the Bluetooth address (12 hex digits, no colons). For example,
LnkB0400fd002031.
After scanning the VX3Plus Bluetooth label, if there is no beep and no LED flash from
the Bluetooth device, the devices are currently paired.
1
.
VX3Plus Reference Guide
27