Setup A New Device - LXE VX3Plus Reference Manual

212

Setup a New Device

Prerequisites:
LXE CE devices with the AppLock feature are shipped to boot in Administration mode with no
default password, thus when the device is first booted, the user has full access to the device and no
password prompt is displayed. After the administrator specifies applications to lock, a password is
assigned and the device is rebooted or the hotkey is pressed, the device switches to end-user
mode.
Briefly, the process to configure a new device is as follows:
1. Insert a fully charged battery and press the Power button. See Chapter 1 – Introduction
2. Connect an external power source to the device (if required). See Chapter 1 –
3. Adjust screen display, audio volume and other parameters if desired. Install accessories
4. Tap Start | Settings | Control Panel | Administration icon.
5. Assign a Switch Key (hotkey) sequence for AppLock. See Security Panel.
6. Assign an application on the Application tab screen. More than one application can be
7. Assign a password on the Security tab screen. See Security Panel.
8. Select a view level on the Status tab screen, if desired. See Status Panel.
9. Tap OK.
10. Press the hotkey sequence to launch AppLock and lock the configured application(s).
11. The device is now in end-user mode.
Note:
Note:
Note:
VX3Plus Reference Guide
•
The touch panel must be enabled.
•
An MX3Plus default input method (Input Panel, Transcriber, or custom input
method) is assigned.
for instruction.
Introduction for instruction.
(e.g. handstrap, stylus). See Chapter 1 – Introduction for instruction.
assigned. See Application Panel.
AppLock cannot support multiple windows of some applications. Attempting to open
multiple windows of RFTerm or Pocket Word will cause AppLock to switch to
administration mode.
To reset the device to factory default values, please refer to Chapter 3 "System
Configuration" section titled "Utilities" and the RegClear, PSMFormat and ColdBoot
executable files.
AppLock Administrator Control panel file Launch option does not inter-relate with
similarly-named options contained in other LXE Control Panels.
Setup a New Device
E-EQ-VX3PLUSRG-A