Scanner - LXE RX2 Reference Manual

56

Scanner

Access:
The scanner panels have limited effect on the RX2.
COM1 is connected to the RFID reader and parameters cannot be edited by the user.
COM3 is an external RS-232 serial port.
COM2 is not used.
Set scanner keyboard wedge, scanner icon appearance, active scanner port, and scan key settings.
Assign baud rate, parity, stop bits and data bits for available COM ports.
RX2 Reference Guide
Start | Settings | Control Panel | Scanner
Factory Default Settings
Main
Port 1
Port 2
Power Port 1 while asleep
Send key messages WEDGE
Keys
Left Scan
Right Enter
COM Ports (COM1)
Baud Rate 115200
Parity None
Stop Bits 1
Data Bits 8
Power on Pin 9 On
COM Ports (COM2 - 3)
Baud Rate 9600
Parity None
Stop Bits 1
Data Bits 8
Power on Pin 9 Off (N/A for COM 2)
Disabled
RFID Internal
Disabled
Enabled
Control Panel Options
E-EQ-RX2RG-B