Figure 7-12 Add A New Profile - LXE MX6 Reference Manual

Configuring an MX6 Radio for WPA
1. Tap the Add button for a new profile and enter a name for the authentication profile.
2. Enter a valid Identity. This must be a username that is in the RADIUS server. No
3. Set Authentication Type to PEAP.
4. Do not use a certificate for PEAP client authentication.
5. At the tunneled authentication box choose Generic Token Card (GTC) in the Protocol
6. Enter the username in the identity text box again here, then enter the password for the
Note:
E-EQ-MX6RG-E
Version 7.03

Figure 7-12 Add a New Profile

password is entered. You may choose to use a dummy login entered into the RADIUS
server for Phase 1 connection. Then use another identity for Phase 2 when the data is
encrypted.
drop down box. See "Tunneled Authentication" for parameter explanations.
username.
In version 2.0.2 of the Meetinghouse supplicant there is no sign on screen. Each time the
user signs on the MX6 they will have to open the client configuration and re-enter the
GTC token passcode into this field and then restart the client before that passcode
expires.
Version 7.11 and 7.13
MX6 Reference Guide
271