Create A New Profile; Figure 4-74 Add / Edit Network Profiles Display - LXE MX6 Reference Manual

Settings Options

Create a New Profile

Access:
Tap the New icon. The following screen is displayed:
Enter the values for the new profile.
LXE recommends changing the default AP Search Threshold "Low Density" value to "Medium
Density".
Tap Cancel to ignore all changes made on this screen. Tap OK to make the changes, close this
screen and save the changes.
E-EQ-MX6RG-E
Start | Settings | Connections tab | 802.11b icon | Config tab

Figure 4-74 Add / Edit Network Profiles Display

157
MX6 Reference Guide