Retrieving A Parked Call In The Fac Mode; Parking Or Retrieving A Call In The Transfer Mode; Parking A Call In The Transfer Mode - 2N T58W Pro User Manual

Table of Contents

Yealink T58W User Guide

2. Do one of the following:

If you want to park the call against the local extension, press the # key.

If you want to park the call against the desired extension, enter the extension (for example, 4606) where you

want to park the call and press the # key.

If the call is parked successfully, you will hear a voice prompt that the call is parked.

Tip

: You can use a Park key or a BLF key to park a call to a specific contact directly.

Retrieving a Parked Call in the FAC Mode

You can retrieve a parked call in the FAC mode from any phone within your network.

Before You Begin

Your system administrator has set call park in the FAC mode. There is a call parked on the extension.

Procedure

1. Pick up the handset, press the Speakerphone key

2. Select Retrieve Park on the dialing screen.

The phone will dial the park retrieve code which is configured in advance.

3. Follow the voice prompt to retrieve:

Press the # key on the phone where the call is parked.

Enter the desired extension followed by # (for example, 4606#) on any phone.

Tip

: When the phone is idle, you can use a Retrieve key, BLF key or BLF List key to retrieve a parked call directly.

You can park the call to the shared parking lot through a blind transfer.

For some servers, the system will return a specific retrieve park number (park retrieve code) after parking suc-

cessfully.

Topics

Retrieving a Parked Call in the Transfer Mode

Parking a Call in the Transfer Mode

You can park a call in the transfer mode directly. When you park a call to the shared parking lot, the call is held on

your phone.

Before You Begin

Your system administrator has set call park in the Transfer mode.

Procedure

1. During a call, select Park.

or tap the line key.

Advanced Call Features

Table of Contents