Configuring The Phone Audio Feature; Configuring The Media Audio Feature; Changing Your Phone's Bluetooth Name - 2N T58W Pro User Manual

Table of Contents

Yealink T58W User Guide

Answer a call. An incoming call to your mobile phone is also shown on the phones, you can answer the call

on the phone. The phone will firstly match the contacts in the mobile contacts directory to present the caller

identity.

During the call, you can hold/resume, mute/unmute or end the call on the phone.

Configuring the Phone Audio Feature

After syncing the mobile contacts to your phone, the phone acts as a hands-free device for your mobile phone. The

call is made through your mobile phone, but the audio is present and the call control is done by the phone.

If a Bluetooth headset is connected to the phone, you can choose to answer a call using the Bluetooth headset.

Procedure

1. Swipe left or right to go to the second idle screen.

2. Go to Settings > Basic Settings > Bluetooth.

3. Select

after the desired Bluetooth device name.

4. Turn on Phone audio.

5. Select

If a Bluetooth headset is connected to the phone, you can enable the media audio feature to stream the audio from

IP phone to Bluetooth headset. The Bluetooth headset acts as the player for the SIP phone.

Procedure

1. Swipe left or right to go to the second idle screen.

2. Go to Settings > Basic Settings > Bluetooth.

3. Select

after the connected Bluetooth headset name.

4. Turn on Media audio.

5. Select

You can change the Bluetooth name for your phone to identify your phone to other Bluetooth devices.

By default, the phone is identified as "Yealink-T58" or "VP59" or "Yealink-SIP-T58W" by other Bluetooth devices.

Before You Begin

Make sure that the Bluetooth mode is activated.

Procedure

1. Swipe left or right to go to the second idle screen.

2. Go to Settings > Basic Settings > Bluetooth > Edit My Device Information.

Bluetooth

157

Table of Contents