Dect Intercom; Configuring Auto Intercom; Placing A Dect Intercom Call On The Handset; Placing A Dect Intercom Call On The Phone - 2N T58W Pro User Manual

Table of Contents

Yealink T58W User Guide

DECT Intercom

When the handset is registered to the phone successfully, you can place/receive a DECT intercom call to/from the

handset registered to your phone.

Topics

Placing a DECT Intercom Call with a DECT Intercom Key

Performing a Blind Transfer to the Handset

Merging the DECT Intercom Call with SIP Call into a Conference

Configuring Auto Intercom

You can configure the phone to automatically answer an incoming internal intercom call and play a warning tone.

The following types of warning tones are available:

On (Beep On): The phone answers an incoming internal intercom call automatically and plays a warning tone.

On (Beep Off): The phone answers an incoming internal intercom call automatically without a warning tone.

Off: Auto intercom feature is off. You need to answer an incoming internal intercom call manually.

Procedure

1. Swipe left or right to go to the second/third idle screen.

2. Go to DECT Settings > Auto Intercom.

3. Select a desired option from the Auto Intercom field.

4. Tap

Note

: Your system administrator can configure the auto intercom feature for your phone and the registered handsets at the

same time.

Placing a DECT Intercom Call on the Handset

You can place a DECT intercom call to a handset registered to the same phone, or place a DECT intercom call to

the phone that you register the handset to.

Up to two intercom calls can be set up on the handset.

Procedure

1. Go to OK > Intercom.

The phone screen displays the names of all registered headsets and the All Handsets option.

2. Highlight the desired handset or phone.

3. Press OK to dial out.