Using Dect Handsets With Your Phone; Attaching The Dect Usb Dongle Dd10K; Handset Registration; Setting The Phone To The Handset Registration Mode - 2N T58W Pro User Manual

Table of Contents

Yealink T58W User Guide

Using DECT Handsets with Your Phone

You can turn Yealink IP phone into the corded-cordless phone.

The corded-cordless phone consists of a VP59/T58A/T58W phone, a DECT USB dongle DD10K and at least a

handset. The supported handsets include W52H, W56H, W53H, CP930W, W59R, and DD phone. The

VP59/T58A/T58W phone acts as a base station and Handset 1. You can register up to other four handsets to one

phone. It allows you to manage calls when you are away from your desk.

Note that you can still use the phone features as usual on the corded-cordless phone.

Topics

DECT Intercom

Repeater Mode

Satellite Mode

Shared Directory

Renaming the Handset

Locating a Handset

Changing Base PIN

Attaching the DECT USB Dongle DD10K

You need to attach the DECT USB Dongle DD10K to turn the phone into a corded-cordless phone.

Procedure

1. Attach the DD10K into the USB port on the phone.

Handset Registration

After attaching the DD10K, you can register up to four handsets to your phone.

Topics

Registering a Handset to the Phone

De-registering a Handset on the Handset

De-registering a Handset on the Phone

Setting the Phone to the Handset Registration Mode

You have to set the phone to the handset registration mode before you register a handset to the phone.

Before You Begin

Make sure you have attached a DD10K to the phone.

Procedure

1. Swipe left or right to go to the second/third idle screen.

2. Go to DECT Settings > Handsets.

3. Select Register.

The phone prompts you to register your handset.