Performing A Semi-Attended/Attended Using A Transfer Key; Performing A Call Transfer By Selecting A Transfer Mode; Conference Calls - 2N T58W Pro User Manual

Yealink T58W User Guide

Performing a Semi-attended/Attended Using a Transfer Key

After you have set a Transfer key with a specific contact, you can perform a semi-attended/attended transfer by
using it.
Before You Begin
Confirm with your system administrator that the transfer mode has set to perform attended transfer.
Procedure
1. Tap the Transfer key during a call.
The phone calls the specific contact first. Wait until you hear the ringback tone or until the contact answers the
call.
2. Tap the Transfer key again.
Related Topic
Setting a Transfer Key

Performing a Call Transfer by Selecting a Transfer Mode

During the call, you can press the Transfer key to select a transfer mode.
Before You Begin
You need to set a Transfer key for a specific contact. Check with your system administrator to find out if this call
transfer feature is available on the phone.
Procedure
1. Press the Transfer key during a call, the phone screen is shown below:
2. Select the desired transfer mode.
Related Topic
Setting a Transfer Key

Conference Calls

The phone supports creating local conference and network conference.
During the conference, follow these tips:
Use the handset or a headset if you're in an open environment.
l
Mute your microphone when you are not speaking, especially in noisy environments.
l
Call Features
58